An essential tool to have in every scrap metal yard is a Rad Comm Portable for detecting radiactive material. The RC2 is designed for the metals industry and is fully automatic, highly sensitive and easy to use in containers or vehicles that may contain radioactive materials, or to verify or separate radiactive materials that have triggered an alarm on a large scale radiation detection system.

The Portable contains a state of the art microprocessor and internal circuitry designed to automatically set the lowest achievable alarm level and to continuously monitor to maintain an optimum performance.

Supplied in different knife hardness for tyres/aluminium/cables.

Pictured: 25mm Screen for SR1602 in Hardox, 18mm screen for MPR160 in Hardox.

We supply Eldan manufactured flying knives and static knives:

• Rasper 800-1, 1200-1 (pictured)
• Rasper Heavy 800-3 / 1200-3 / 1207
• Heavy Rasper 122/162/202
• Tyre Rasper 120/160/200
• Multi-purpose Rasper 120/160/200
• Heavy Pre-Granulator 125/165/205
• Heavy Granulator HG129/169/209
• Fine Granulator FG476/952/1504

Depending on the type of material you are processing, we supply different hardness quality for processing tyres, aluminium and cables. We can also supply all knives with bolts, washes and nuts.

Contact us to discuss your requirements.

It has a throughput of 2 - 4 ton/hr on steel, it is supplied with PLC control and has cycle time of 70 seconds.

The machine is built with MN65 steel liners, lid and box blades and is supplied with an in feed hopper.

After careful study of the machinery market they chose a granulator that is proven technology and used by many cable processors world wide.

Using a fine granulator they will be able to process a mixed range of cables including very fine wire.

This modern Eldan plant is located in the heart of the country. The Eldan machinery can process truck and car tyres, in this project we are processing car tyres with very little handling.

The tyres are deposited into a tyre feeder which has a hopper, they are then fed into the Eldan Super Chopper, SC1412T where they are shredded. The shred is then loaded in to the Tumble back feeder which feeds the Eldan Multi-Purpose Rasper, MPR 160T that will produce 20mm tyre chips. The MPR will also liberate the steel so that it is completely removed using magnet separation. The material is screened off and by using pneumatic transport and a dust filter system, they are able to produce a premium chip for the equestrian market.

This Eldan plant is going in to Sims Tyre Recycling in Glasgow which incorporates a new tumble back feeder system going into the Eldan Heavy Rasper HR162T.

The plant will be set up to process shredded tyres (truck & car) up to an input capacity of 3 ton/hr, the steel will be liberated and completely removed by magnetic separation. The chip material will be screened off through a classifier to produce two sizes : a clean equestrian product, and a fine powder fraction.

Agents and distributors for Eldan met up this week at the factory in Denmark for a very enjoyable Agents Seminar. We thought it always rained a lot in the U.K. but it rained heavily everyday in Denmark!!

It brought us together with our colleagues from around the world to discuss our different territories, gain new knowledge from Eldan on the different types of equipment being manufactured and developed to suit new legislation. As a result we have a better knowledge and are better informed to guide our customers make the right choice in buying an Eldan plant!

MMH is very pleased to be involved in this exciting project whereby the carbon black will go into producing new tyres, with the Rasper 1207 being used to liberate the wire from shredded tyres.

This small plant is processing whole car tyres through a pre-shredder and then through an Eldan 1200-3 Rasper to liberate the wire to produce a clean equestrian chip.

The owner Robbie Essam hasn't looked back, confirming that he produces such a good product sales are increasing all the time and orders are coming in daily.

The plant has been set up to be run using just one operator, keeping it neat, efficient and economical. Robbie manages his business very well and we look forward to continuing our co-operation together.

O'Riley Recycling of Dublin took delivery recently of their new 125 ton Buffalo 3 Ram automatic baler.

The machine was soon put into action producing a 300 x 300 x variable bale from aluminum extrusions, copper pipe and stainless steel. With a 125 ton pressure force on the pusher and side cylinders, and a 70 second cycle, it produces a very dense bale for export. This baler is now one of many in operation in the U.K.

In response, Eldan's Research and Development have developed three different standard solutions for cleaning the steel fraction. These are:

1. Screening system with an output of approximately 95-97% clean steel wire.
2. Multi purpose rasper system with an output of approximately 97-98% clean steel wire.
3. Multi purpose rasper and screening system - a deluxe solution with an output of approximately 98-99% clean steel wire.

The plants can be tailored to individual customer requirements and are already operating successfully in a number of sites. For more information, contact MMH with your requirements.

In addition to being a ward councillor for the area he is also a member of the Greets Green Partnership Board, Cabinet Member for Regeneration in Sandwell and also the lead member for environment.

GGCE Environmental Ltd is a not for profit company which aims to provide a total IT Solution, reinvesting profits back into the community and employing local people. MMH are very proud to be part of this pilot plant and look forward to getting involved with them in other WEEE projects.

• » 1200 length rotor made from wear resistant steel
• » 90kw electric motor, friction clutch, serrated knives
• » New in let hopper

Contact us now for further details and pricing.